Pro Trade Series™ TPH

Heavy-duty one-piece rectangular hollow section (RHS) chassis hot-dip galvanized, and powder coated 4” x 2” x 5/32” thick

Precision CNC Laser cut and Pressed Manufacturing processes

Pressed rear tailgate and sides 1’ 3” high

12 gauge aluminum front box and canopy to reduce weight but also keep strength

Our trailers are thoroughly powder-coated

The top storage rack with welded mesh on the underside is 3’ 9” x 5’ 9”

The rear deck section on the TPH is 8’ 10” (L) x 5’ 2” (W) (internal)

The H -frame racks and sides can be removed if required to create an open deck area

Front drawbar load support rack that’s removable and can also take the spare wheel to free up deck space

The spare wheel can also be mounted in the tray against the canopy

Powdered coated aluminum stone protection plates and foot treads all around

Automotive seals and gas struts on all doors and drawers

Compression locks on all doors and storage compartments

Fittings: Stainless steel bolts, nuts, washers, screws, and pop rivets

Off-road independent swing arm suspension with flat top coils and twin shock absorbers

Dual 12’’ electric brake hubs with 6 stud Land cruiser stud pattern

5 x 15” custom alloy rims and 235/75R15 BFG all-terrain K02 tires

9,920 lbs tow coupling to suit 2.75” ball with handbrake

Main canopy storage compartment - Left side 3’ 9” (W) x 2’ 3” (deep to the wall)
Floor to shelf 1’ 9” (H)
Shelf to roof 1’ 2” (H)
The shelf is 1’ 10” (deep)
The bottom section beside toolboxes is 1’ 9” (H) x 1’ 2” (W) 2’ 3” (deep)

Toolboxes have 4 drawers; 1’ 8” (L) x 1’ 8” (W) x 4” (H)

The bottom storage drawer; 2’ 9” (L) x 1’ 3” (W) x 9” (H)

The other look-alike drawer on this side is a swing open door that houses the light switch panel and breaker switches

Main canopy storage compartment - Right Side 3’ 9” (W) x 3’ 4” (deep to the wall)
Floor to shelf 1’ 5” (H)
Shelf to roof 1’ 6” (H)
The shelf is 3’ 2” (deep)

Bottom storage drawers 2’ 9” (L) x 1’ 3” (W) x 9”

Front storage fridge box

Enclosed front storage box with fridge slide, storage drawer, and open compartment on opposite side; 5’ (L) x 2’ 3” (W) (both sides of this box have 12 volts Anderson plug power sockets and a fan)

Fridge slide size area is 2’ 8” (L) x 1’ 8” (W) x 1’ 10” (H- to top of the draw)

The drawer above the fridge area is 2’ 7” (L) x 1’ 7” (W) x 6” (H)

Storage rail system on top of the front box for additional items to be carried

The right side of this box has an area of 2’ 3” (W) x 2’ 2” (D) x 2’ 8” (H – from floor to roof)

Rear drawer system

Rear drawer on heavy-duty full ball-bearing guides for size and strength; 9’ 8” (L) x 1’ 6” (W) x 5” (H)

H-frame rack

The Rear H-frame rack comes with a rear roller to assist with ease of loading

H-frames are 5’ 8” (W) x 6’ (H overall)

All 3x H-frame racks are completely removable with the sides, or you also have the choice to remove the top section of the hurdle itself and leave the post and sides attached

Fuel holders

2 x jerry can holders are also supplied with this build and can be mounted to your preferred location

Full LED internal lighting with control management panel in main body

2 x 120amp AGM batteries

50-amp Anderson plug for charging while driving or with optional solar

LED tail lights with reverse light, LED side marker lights, and front clearance lights

Safety breakaway unit

Empty: 3,483 lbs (without added options)

GVWR: 8,000 lbs

Load Capacity: 4,517 lbs

Ball Weight: 341 lbs (Dry)

Overall Size: 18’ 6” (L) x 7’ (W) x 7’ (H)

Custom graphics and wrapping

Marine grade carpet lining

Inquire about other accessory and package options